alics Blogs

With online retail emerging as a force to reckon with across emerging economies, USB charger brands are concentrating on different ways to expand their online presence while becoming more agile and responsive. Analyzing the market progression and unceasing growth, Transparency Market Research estimates the USB charger market revenue to cross US$ 30 Bn in 2019. Mustak Ahmed – Would you be willing to rephrase your question and provide a little more information? For instance, do you have a USB-C Android phone or a micro-USB phone and what are you using to charge it ? An update on the Hyperjuice; I don’t use it very frequently (it’s my backup from my Surface Pro when I’m away from my work and home docks), but it seems to do the job well. I’ve even had it charging my Surface Pro and my Dell Latitude at the same time . For a start, they lack the 15V alt-mode required for compliance. A larger wattage charger must do everything a lower wattage charger will. That means if it has 20V then the 15V mode must be presence.

Besides the standard type-A and type-B configurations with 4 pins, there are also the USB Mini-A, Mini-B, Micro-A and Micro-B that include an ID pin to permit detection of which cable end is plugged in. USB cables are generally standard type-A on one end and either type-B, Mini-B or Micro-B on the other. The new type-C connector described later features 24 pins and runs on the USB 3.1 standard. A typical USB network consists of a host that is often a PC and peripherals such as a printer, smartphone or camera. Data streams in both directions but the power is unidirectional and always flows from the host to the device. If you need a USB port but only have 3.3V of power, or need to power a downstream uC even when your switch is off, a switch with boost or switch with LDO may be right for you. Prime deals company has released a very attractive charger. Black, white, blue, rose red colors are available to customers.

The Monoprice is made by Golden Profit Electronics (formerly ShaYao Electric Factory Three – no word on what happened to factories One and Two). The Belkin charger is manufactured by the obscure company Mobiletec of Taiwan. The KMS charger doesn’t give any clues as to the manufacturer, and I can’t identify KMS as a company. Interestingly, Astec’s big break was manufacturing power supplies for the Apple II, as I discuss in my article on the Apple II power supply. The chargers use specific voltages on the data pins to indicate the charger type to the device being charged. Because of this, an “incorrect” charger may be rejected by an iPhone with the message “Charging is not supported with this accessory”. Under the USB standard, a charger should short the two data pins together to indicate that it’s a “dedicated” charger and not a real USB device. However, companies such as Apple, HP, and Sony have their own proprietary nonstandard techniques. The following table summarizes the voltages that appear on the D+ and D- lines for different chargers, and how the D+ and D- lines are configured internally. The Motorola charger shows a bit of voltage sag, but good current stability.

A+C quick charger

In our tests , the RAVPower Pioneer RP-PC133, delivered a full 15 watts (3.27V, 4.72A) from its Type-A port while also providing up to 54.9 watts (19.6V, 2.8A) from its USB-C port at the same time. As of this writing, Aukey’s Omnia PA-B2 is the smallest USB-C laptop charger on the market. This diminutive wall wart measures just 1.77 x 1.77 x 1.18 inches, which makes it even smaller than RAVPower’s tiny Pioneer RP-PC112, which is just 1.9 x 1.9 x 1.2 inches itself. The Omnia PA-B2 is also a full 0.45oz lighter than its competitor. If you’re using a 16-inch MacBook Pro or another USB-C laptop that requires more than 65 watts of juice, the Aukey Omnia PA-B5 is your best bet. Though it is conservatively rated for 65 watts, in our tests, the 3.65oz Aukey Omnia PA-B4 managed a maximum sustained rate of 72.6 watts (19.2V / 3.78A). After 20 minutes of that maximum the temperature hit a steamy 139 degrees Fahrenheit, but the charger was a much cooler 120 degrees, the second coolest of all chargers we tested, when run at 64 degrees. We benchmarked several USB-C laptop chargers with Gallium Nitride to help you find the right one for you. This Aukey phone charger is about as dinky as they come, just a couple of inches wide and an inch thick.

Read on to find out which one can do the best job of keeping your devices charged up and ready to go. The popularity of the type C charger is rising in the USB charger market due to the launch of advanced products with power delivery functions. The different types of USB chargers are USB wall chargers, USB car chargers, and portable power banks/docking systems/alarm clocks. Analyzing the demand for fast charging speeds and high charging efficiency, manufacturers are launching their own type C charger models with advanced features. For instance, Huntkey, a leading power solution provider, is developing a new model of portable 90W type C for overseas markets. Apart from superlative charging efficiency and best-in-class quality, the portable design is a key USP of this new product launch by Huntkey. In addition, manufacturers are also working on offering space-efficient and heat-resistant designs of USB chargers, with the sole objective of scaling up their product positioning. Companies in the USB charger market are also investing in supplier-retailer relationships that go beyond ‘day-to-day’ business transactions, and promise long-term profitability for both the parties.

This model looks great but to a certain extent that doesn’t really matter too much. You see, the body of the charger will be hidden out of sight, with only the top plate visible, completely flush with the accessory port. The part that is visible boasts an all aluminum construction whilst the port glows with a very pretty – and actually very useful – blue light. Of course, if you’re praying about USB chargers, it might be wise to redirect some of that energy. Some people are reluctant to buy a USB charger because they have visions of a big, funny shaped lump sitting up out of the dashboards. For most people, the practical abilities of larger USB chargers outweighs their sometimes less than aesthetic looks. If you have a modern, flush dash and you don’t want to ruin its visual appeal with an unsightly, bulky charger then this could be the answer to your prayers.

Again, since most USB ports do not disconnect power, this approach can work in most cases. When such a device is plugged into a port that cannot support 500mA, the port is supposed to shut down. However, the overload behavior of a USB port is not always well defined and can lead to system reset or damage. Fortunately, this level of desperation is no longer required since battery charging is now an active part of the USB specification. In Figure 9 a low-resistance (40mΩ) on-chip MOSFET between the system load output and the battery serves multiple functions during charge and discharge operations. During charging, this Smart Power Selector switch makes the best use of limited USB or adapter power, utilizing input power not needed by the system to charge the battery. It also lets the battery serve as a storage buffer, supplying load peaks that may momentarily exceed the input current limit. During discharge, the switch provides a low-loss path from the battery to the system.

The proliferation of smartphones and tablets indicates that a typical person might need to charge three or four devices at once, due to current usage patterns. Using a separate charger for each device means taking up valuable outlet space. With a USB lead, you can connect to a desktop or laptop and draw power via yourcomputer power adapter cable. USB ports can only pass 500 milliamps of power at a time, and wall outlets can pass 2 Amps. With a multi-port charging station, you can charge four or more devices using a single USB wall charger, and enjoy faster charge times. The RAVPower 30W Dual Port Compact PD Charger (RP-PC132) is the best dual-port charger for getting the maximum charging speed on your phone no matter what cable you use. It provides both a 12-watt USB-A port and an 18-watt USB-C port, so you can charge your phone two to three times faster than with the charger that came in the box with your phone.

Additionally, it’s equipped with a good ol’ USB-A port for recharging gadgets like your headphones that may still use a standard USB cable. Not only is this charger super fast, but it’s also ultra portable. It has foldable prongs, weighs just 3 ounces, and at 2×2 inches, it’s small enough to fit in the palm of your hand. When shopping for a portable charger, versatility matters. The Omnia Mix charger gives users the best of both worlds. It has a USB-C Power Delivery port that, when used on its own, can provide you with an impressive 65 watts of power — enough oomph to recharge a 15-inch laptop at max speed. Of course, it can fast-charge a tablet, smartphone, or a Nintendo Switch, too. The cable that plugs into the Micro USB 2.0 socket on this smartphone has a Type A plug at the other end for the computer or AC charger.

Arguably the most useful benefit of USB’s power capabilities is the ability to charge batteries in portable devices. Nonetheless, there is more to battery charging than picking a power source, USB or otherwise. This is particularly true for Li+ batteries, where improper charging can not only shorten battery life, but also become a safety hazard. A well-designed charger optimizes safety and the user experience. It also lowers cost by reducing customer returns and warranty repairs. Arguably the most useful part of USB’s power capabilities is the ability to charge batteries in portable devices, but there is more to battery charging than picking a power source, USB or otherwise. This is particularly true for Li+ batteries, where improper charging can not only shorten battery life, but also can be a safety hazard. Charging batteries from USB requires balancing battery \”care and feeding\” with the power limitations of USB as well as the size and cost barriers ever present in portable consumer device designs.

Safety certification by the Underwriters Laboratory is an important designation. Since there have been a number of extremely low quality and uncertified chargers available for sale, they are not only less energy efficient, but can also possibly damage your devices and even create a fire hazard. Considering that many people use their chargers in their bedrooms, safety is of vital importance. The Leviton 4-Port USB Charger has four Type A USB Ports designed to charge electronic devices such as tablets, phones, e-readers, etc. It does not have an outlet; it is only a USB charging device offering 4.2 Amps of power with the ability to charge up to 4 electronic devices at once. Using a Dual Type-C with Power Delivery USB In-Wall Charger is the ideal way to be certain all devices are receiving the highest level of power they can accept for the fastest charge. As PD becomes the standard, installing a USB Charger with PD is the best way to ensure the fastest charging of future PD-enabled devices. Leviton USB In-Wall Chargers deliver maximum power for faster charging. Our entire line of USB wall outlets features a smart chip which recognizes and optimizes the charging requirements of the connected device.

Despite its advertised 40-watt maximum output, we measured 12-watt draw from all four ports at the same time, for about 48 W total. Based on our experience with the PowerPort 4, even if the speeds do drop a bit in practical use, you can still be sure of fast USB-A charging across all the ports. The Aukey Focus Duo 36W Dual-Port PD Charger (PA-D2) is what you should get if you want to take advantage of fast USB-C with multiple devices. When a single port is in use, it charges at up to 30 watts. This dual–USB-C setup is still pretty rare, and the PA-D2 offers the best execution of it. Be sure to allow yourself room to expand by purchasing a charger with more ports than you currently need. This will help you to maintain your goal of reducing clutter by using only one outlet when you expand your inventory of electronic devices that require charging.USB cables. Using a substandard USB cable can hinder full-power charging of your devices. Even though the cables that accompany smartphones are sufficient, some of the generic micro USB cables do not perform the job very well.

At the beginning, you mentioned “noisy power that cause touchscreen malfunctions”. I’m going through the source you linked to, but I have had this question in my head for a while now, so I’ll just put it here. Can you do this comparison for genuine original laptop AC adapters and a cheap aftermarket one? I am curious as to the differences between a $80 original from Sony and a $15 third-party one. The spike, noise, and ripple measurements come from the oscilloscope traces. The Spikes measurement is based on the maximum peak-to-peak voltage on the high frequency trace . The Noise measurement is based on the RMS voltage on the high-frequency trace, and Ripple is based on the maximum dB measured in the low-frequency spectrum. Since the input AC has a frequency of 60 Hertz, you might wonder why the ripple in the output is 120 Hertz. The diode bridge converts the 60 Hz AC input to 120 Hz pulsed DC, as shown in the diagram below. The pulses are smoothed out with filter capacitors before being fed into the switching circuit, but if the filtering isn’t sufficient the output may show some 120 Hz ripple.