Wooden Handle Clearing Axe
Submerge the entire axe in oil and leave it for at least a week. When an axe handle is soaked the end grain acts like a straw to wick the oil. This method produces the highest level of saturation and penetration but can be difficult to do to full size axes. A very traditional wood for axe handles is hickory – its got good “spring” to it, so it can absorb some shock. The easiest source I know of is a yard sale baseball bat. In America, the best wood is hickory , in Europe it is ash (unless you can get some hickory!). If you’re making a carving axe or a hewing hatchet, the handle will take much less stressed than with a splitting or a felling axe. Ace carries a great selection of replacement axe handles to help you find the perfect one to get you back to work.
The axe head of a good quality axe such as those made by Gransfors Bruks is typically made of steel that is not stainless. That is, it will quite easily rust if allowed to remain damp for a period of time. This would obviously have a detrimental effect on both the finish and ultimately the longevity of the axe head. A good axe will have a head made from high quality steel. The head will be tempered so that the bit of the axe is tough, not easily chipped and able to attain a very sharp yet resilient edge. This quality piece of steel will also need some protection and care to keep it in prime condition. Start with the bark side first and trim away the bark and a few rings of growth. I use a carpenter’s axe, which has a sharp edge ground on only one side, much like a plane blade, but you can use any hatchet. The advantage of a carpenter’s axe is that the edge is straight and the blade cuts straight down rather than into your stave. With the wood in the photo above, I will use the chunk on the left, close to the bark and where the growth rings are fairly close.
The Gerber 23.5” Axe is designed with every possibility already covered with its unique geometric angles. Be sure to also check out our list of the best camping saws for more great items like this. Read our best axe for splitting wood guide to learn more. The blade’s efficiency mainly comes down to the material used, but its width is also important. With both the blade and the ‘bit’, too much width will make trimming branches tricky. If, however, these sections are overly skinny, in all likelihood the axe will wedge and get stuck if swung into larger logs.
The more you use and maintain an axe, the better it looks. Today we’re looking at easy and simple handle treatments for your Hults Bruk axe. Handle treatments not only help preserve and protect your handle but also will enhance its appearance over years and years of hard use. Place the safety disc on the eye of the axe head so it is completely covered. Now transfer the positions of the holes in the safety disc onto the handle using e.g. a pencil. Even though the hickory and ash that OCHSENKOPF uses for its handles are two of the strongest and longest-lasting materials there are, the fact is they are still natural materials. Environmental influences such as the weather and temperature can affect the wood over time. Product care and the right storage are also extremely important in order to maintain the quality for the long term.
It is known as the high impact resistance wood because it has the ability to carry the overload. It is commonly used around the world for making papers. It has the number of wood knots due to its heavy growth, besides he knots its strength enhances its value. The axe throwing clubs used cottonwood targets, because of its strength and lightweight. There are different types of woods used by peoples according to their level of expertise. The logs used in competitions because there are numbers of the people playing at the time and they can survive for a longer time period than other parts of the woods. The logs have the capacity of surviving the throwing axe, they cannot be easily cracked. The targets can be made from the wooden boards and the different parts of the woods. I chose to make my wedge out of Poplar and just cut some material on the band saw in a wedge shape.
With the second cut, I only went down 2/3 and with the last cut, I only went down a third. So basically, the bottom third is only one saw blade wide, the middle third is two saw blades wide and the top third is three saw blades wide. This should give you a nice tight fit for the hatchet head and you should now have a handle that is ready for finishing and mounting. You will want to draw lines along your centers of the top of the handle to make sure your saw is not going off track. I once agian had a friend help by watching me and making sure I was cutting straight. This is the part that will essentially flare out once a wedge is driven into the cut to help hold the head on. If you did step five correctly, this part of the hatchet should extend through the eye of the hatchet by around 3/8 of an inch. This can later be left on or ground off in the final step. This cut should be around half way through this part.
If you don’t have the time to replace a handle, buying a new axe will save you effort. Filling in the opening on the other side of the axe’s eye will prevent it from moving around as much. You can do this by lightly tapping a thin wedge of wood into the kerf, and securing it with layers of carpenter’s glue. Files and rifflers may also be used to file down a length of wood.Allow at least half an inch between the bottom of the kerf and the main handle. Each time you push it in, check how far it gets in based on the bottom of the kerf. Although you shouldn’t apply very much pressure when you’re first starting out, this will hopefully give you a proper idea of the measurements the top of your handle needs to be. Take measurements following each test fitting.Cut down the handle as the test fittings suggest. If an inch of kerfed handle is sticking out, for example, it means you’ll have to shave down an equal amount of your handle accordingly.
In terms of blade hardness, the use of HRC57 steel ensures that this axe will have excellent blade retention and maximum hardness for easy chopping and cutting. The Outdoor Axe is very decently priced for such a quality axe. The axe head is struck multiple times during the hand-grinding production process, increasing the density and making the end product extremely durable. The tempered zone of the axe facilitates maximum blade retention. Despite its size, the axe is carefully designed to give its user maximum leverage, allowing it to be used for animal skinning and other more delicate tasks. This axe is perfect for those looking to buy a good axe at a low price. While its price tag is one of its main selling points, it’s also a quite effective bushcraft axe.
This helps the axe oil go deeper in the wood and also dries quicker. This is optional as leaving the handle in BLO alone to dry for a few extra days gets almost the same effect. Once an axe handle has been sanded, it is no longer considered “open pore“. In this case, soaking the wood like mentioned previously would not have too much effect. Instead its best to apply a coat by hand, let dry then wipe off and repeat the process. The more you sand down the handle, the smoother and shinier it will look. Raw Linseed Oil is also sometimes used to coat the handle, however it takes longer to dry. Since it is “raw” there are no preservatives – for us that means no mildew protection for our axe handles. 76 1/2″ overall. 20 1/4″ hand forged high carbon steel blade with authentic temper line. Antique brass and black iron tsuba with butterfly motif.
Feather light and easy to carry, these tools are designed to be carried on the trail for camp tasks. They have also been used as devastating weapons in hand to hand combat, or used as thrown weapons. The lighter weight of the tomahawk forces you to swing a lot harder to do the same amount of chopping as a heavier ax. And because of their overall shape, they’re not great at splitting wood. The attractive leather ring grip and one piece forging make this a great looking, long lasting hatchet, and it’s one of the cheapest on our list. Outdoor Life Online EditorsFor an American made classic, the Estwing Sportman’s Axe is probably the most widely available hatchet in the country. Just stop by any Home Depot or Lowes, and you’ll see it hanging there with the hammers and a few other tools. The overall axe length is 14 inches, and the blade’s cutting edge is 3 ¼ inches.
Regardless if they use one or both hands, users will find the axe very simple to operate. The majority of buyers have raved about how well-made this axe is and how efficient it is to use as a hammer too. Grip is another thing buyers have mentioned, which is good because it means it won’t slip out of the hands while using it. All in all, it is the top wood-handle camping axe around. The best wood-handle camping axes can be used to chop firewood, trim thick tree branches and they can double as a hammer in some cases. Not only that, but they can be used to chop meat and other types of food.
Sharpness is not the key in splitting, but it does provide good bites to the meat of log, causing a chink in the premise of splitting apart. But as I perceived from many of my friends in the north, they all refine the axe right out of the box. Hatchets from 20 inches are ideal around the camp for chopping firewood often used by scouts. It’s also an excellent size with which ideal for starters to begin. Because it’s light in the hand so you won’t get tired too quickly. If you’re in the market for a splitting axe, this axe will be the most appropriate choice out there. The sheath is what I wish Husqvarna would improve because it provides little security to the blade.
The long handle is made using premium hickory and is designed for maximum comfort. Axes of all lengths can be considered multi-purpose tools that you can use to fell trees, chop firewood, and do other cutting and chopping tasks. However, axe handle length, along with axe head weight, has a lot of influence on the types of tasks an axe is best suited for. Fix an 18 in handle to a 1.5–2 lb (0.68–0.91 kg) head to make a hatchet. Light axe heads are best suited for shorter handles. Most splitting axes feature shorter handles in order to allow it to achieve wood splitting and wood chopping.