alics Blogs

The Fracturing operation is Made Easier, if the edges and groove intersection of the groove surface are sharp , and the groove is relatively narrow and deep. Grooving on connecting rod is done by laser technology to produce relatively Narrow, V-shaped characterized by sharp corners which promotes crack initiation at relatively low tension force level imposed on single part. Always provide customers with the most effective products and best services. Previous processes left a great deal of waste that had to be removed. Not only is this costly in terms of time efficiency, but much of this waste was hazardous as well, and users were often required to wear protective gear. While there are many different types of laser, they generally work in the same way when it comes to cleaning, although output power, pulse parameters, and wavelength can change dramatically.

The 50W is powerful enough to remove all buildup from your aluminum tooling. The DIHORSE 50W cleans all types of rust no matter how old, tough or thick it is. 3) No chemical cleaning fluid, no consumables, safe and environmental protection. 2) Precise cleaning, with accurate location, precise size and selective cleaning. Customer service staff will assist and guide you to analyze the malfunction in order to locate the cause.

p laser cleaning systems price

Laser cleaning is a non-contact process that generates almost no maintenance , consumes little power and can be completely automated to provide a big return on investment. Laser welding creates oxide byproducts that prevent passivation and give a bad appearance. You can address both issues with laser surface cleaning, which ensures that welding joints are oxide free in just a few seconds. The CleanTech™ Handheld NCX is a complete industrial-grade, rugged, high precision portable laser surface cleaning and conditioning system.

Laser therapy is often combined with other treatments, such as surgery, chemotherapy, or radiation therapy. Laser-induced interstitial thermotherapy , or interstitial laser photocoagulation, uses lasers to treat some cancers using hyperthermia, which uses heat to shrink tumors by damaging or killing cancer cells. Lasers are more precise than traditional surgery methods and cause less damage, pain, bleeding, swelling, and scarring.

The development of a silicon laser is important in the field of optical computing. Silicon is the material of choice for integrated circuits, and so electronic and silicon photonic components could be fabricated on the same chip. Unfortunately, silicon is a difficult lasing material to deal with, since it has certain properties which block lasing. Recent developments have also shown the use of monolithically integrated nanowire lasers directly on silicon for optical interconnects, paving the way for chip level applications.

Some are produced on-site, while others arrive in bulk trucks and are conveyed pneumatically to 25-ft-tall outdoor silos. Each line requires two 90° elbows; a 4-in.-diam pneumatic line is routed vertically up the side of each silo, horizontally for 6 ft, and then down to a silo top inlet connection. Since establishing HORIBA RADIO LABORATORY in Japan in 1945, HORIBA has grown as an R&D company and engaged in international operations, making the most of its experiences and encounters with people along the way. We will continue to meet the varied needs of the world through our measurement and analysis technology. One thing that has remained an important factor for Chapter 2 is the employee culture.